ONLINE CATALOG PAGE 8

Home|Catalog Index|Previous Page|NextPage

EDGE BANDER SAWS

Alternate Top Bevel or All Teeth Beveled to Left or Right

A Specially designed saw for use on both single and two sided edge banding machines, for the end trimming of either wood or plastic banding materials.

Saw No. Diameter Plate Thickness Kerf Bore Hook Teeth EB420 4" .085 .125 5/8" 8° 20 EB4200 4" .085 .125 5/8" 0° 20 EB4524 4-1/2" .085 .125 5/8" 6° 24 EB43424 4-3/4" .085 .125 5/8" 6° 24 EB524 5" .085 .125 5/8" 6° 24 EB5530 5-1/2" .085 .125 5/8" 6° 30 EB640 6" .085 .125 5/8" 6° 40 EB6400 6" .085 .125 5/8" 0° 40 Note: When ordering Alternate Top Bevel add letter A after Saw No. For Left Bevel add letter L after Saw No. For Right Bevel add letter R after Saw No.

THIN RIM SAWS

Alternate Top Bevel or Triple Chip

The perfect saw to use where there is a need for a minimum of stock removal per cut, as in the cutting of plastic or veneer strips for edge banding. Maximum depth of cut on Thin rim blade is 1 3/4 inches.
Saw No. Diameter Plate Thickness Thin Rim Thickness Kerf Bore Hook Teeth TR860 8" .086 .062 .092 5/8" 10° 60 TR1080 10" .086 .062 .092 5/8" 5° 80 TR1280 12" .095 .062 .092 1" 5° 80 TR1210 12" .095 .062 .092 1" 5° 100 NOTE: When ordering Alternate Top Bevel add letter A after Saw No. For Triple Chip add letter T after Saw No.

THIN KERF SAWS

Alternate Top Bevel

Thin kerf blades create less power drain on machine and allow for minimum of stock waste.
Saw No. Diameter Plate Thickness Kerf Bore Hook Teeth TK860A 8" .072 .102 5/8" 5° 60 TK1024A 10" .072 .102 5/8" 15° 24 TK1060A 10" .072 .102 5/8" 10° 60 TK1080A 10" .072 .102 5/8" 5° 80 TK1280A 12" .085 .115 1" 5° 80

Home|Catalog Index|Previous Page|NextPage